I really wanted to stop and go practice my guitar playing, but I just can’t leave this alone. I got a variable neutral density filter so I could do a SNR vs ISO series at 1/30 of a second, only with the green count around 500, which is Zone III with a 14-bit ADC. Same… [Read More]
Archives for February 18, 2013
ETTR — just crank up the ISO? Part 10
With the self-heating tests out of the way, I could start to see the way that the noise floor varied with ISO setting in the D4. I set the shutter to 1/30 and made 16 exposures at ISO settings of 100 through 6400, selected 90% of the image area, and averages the statistics from each… [Read More]
ETTR — just crank up the ISO? Part 9
I’ve spent a lot of time on signal-to-noise ratio (SNR) studies at mid and higher tones (Zones V through VII). Now it’s time to look at SNRs in the darker areas of the picture. Things get a bit more complicated as things get dimmer. At high photon counts, we can safely say that the mean… [Read More]
ETTR — just crank up the ISO? Part 8
Here are the SNR graphs from yesterday, but for the D800E instead of the D4. There is even less reason to increase the ISO to improve the SNR of midtone and brighter values than there is on the D4. Note how low the statistical variation is compared to the D4. Why? I don’t know. Should… [Read More]