• site home
  • blog home
  • galleries
  • contact
  • underwater
  • the bleeding edge

the last word

Photography meets digital computer technology. Photography wins -- most of the time.

You are here: Home / The Last Word / A book report

A book report

May 1, 2015 JimK 41 Comments

I’ve decided to do a book of the Staccato  images. Not a short-run Blurb book printed on an hp Indigo, but the real deal printed on an offset press. In the past, I’ve posted my experiences with processes that some photographers go through, like going to a meat-market print review, and there’s been what passes for a fair amount of interest, given my low standards in such things, so I’ll be reporting on my progress in these virtual pages from time to time.

The best way to see all the posts in this series is to scroll down to the bottom of this one (below the comments) and you’ll find pingbacks to each of them. Click on the pingbacks with the titles that interest you, and you’ll be taken to those posts.

Why would I do a stupid thing like getting a book published?

It’s hard to explain. My elevator may not go all the way to the top floor. It’s hard for me to figure out why I want to do it. I’ll hit the high spots in this first post, and fill in the rest as I gain more insight.

First, for the record, here are a few of the myriad reasons not to publish a book.

  • It’s expensive. Even if it’s a hit in the universe of self-published photographic coffee-table books, you’ll never get your money back.
  • If you want to try and get some of your cash back, selling your book requires that you do a lot of things that aren’t much fun, at least for me. I’d rather make pictures than go around to retail outlets and try to convince then to give me shelf space.
  • You may end up with a garage full of books. That is embarrassing, and may lead to paint damage of the car that’s been displaced from its rightful parking space.
  • It’s a lot of work. You’ll see as this tale evolves.
  • It may require photographers to do things outside their skill set: sequencing, designing, font selection, layout, material selection…
  • In the electronic era, real dead-tree books are passé. If I were up with the times, I’d publish an e-book and call that it.

Undeterred, I’m going to do it anyway. Why?

I think I’m done with the series. It was fun, and I could do some more with it, but it would just be putting in the time and waiting for the right things to happen in front of the camera. I don’t particularly enjoy the travel and lonely stays in hotel rooms that the series requires. I’ve stopped evolving in the creative process in the large sense, although when faced with a new set of captures, getting to the final image requires creativity. I’ve had a show of the work at a well-respected venue, the Center for Photographic Art in Carmel, California. A book seems like a nice way to cap the Staccato series off.

I’m getting older, and I’m starting to think about what’s going to happen to my work after I’m gone. I’m not well-known enough for anyone to set up an archive for my work, even if I were willing to endow it. I haven’t sold that many prints. Having copies of a nicely-done book in the world is something in that direction.

Here’s a really stupid reason. A book seems somehow important to me. Picking up a coffee-table book is an occasion. That feeling probably goes back to my youth, and doesn’t apply today, but I’m stuck with it.

And, of course, there’s ego.

I thought about doing the design and layout myself with help from a friend who’s done several books himself. After several months of essentially zero progress because I never seemed to find the time, I’ve decided to hire a designer. Picking one wasn’t a hard decision. I’m going with Takigawa Design, in Monterey. I’ve known Jerry Takigawa a long time. I’ve seen books he’s done for other photographers. I trust him. He’s not the cheapest game in town, but I’m pretty sure he’s the best.

I’ve also picked a printer. Hemlock Printers is a Vancouver, BC, operation that prints LensWork. Brooks Jensen raves about them. Jerry’s used them a lot in the past, with unfailingly good results. Again, this is not an expense-driven decision. It would be cheaper – probably a lot cheaper — to have the book printed in Hong Kong. My understanding from those who’ve done it is that short run printing in the Far East can provide excellent quality, but you don’t really know what you’re going to end up with until the fork lift takes the books off the truck, and I want to be able to be there for the press run.

Yesterday, I had my first meeting with some people from Hemlock at Jerry’s office: Brad Fleming, a sales representative who works out of Walnut Creek, California, and Peter Madliger, Hemlock’s VP of Prepress.

I’ll report on what happened in the meeting in the next few posts.

The Last Word

← Nikon 300mm f/4E PF ED VR, Leica 280/4 Apo-Telyt-R A book report: decisions, decisions →

Comments

  1. Jack Hogan says

    May 1, 2015 at 2:07 pm

    I like you , Jim. You are the real deal: what you see is what you get. And you are a creative photographer. Publish your book and I’ll be first in line to buy it.

    Jack

    Reply

Trackbacks

  1. A book report: decisions, decisions | The Last Word says:
    May 7, 2015 at 8:55 am

    […] This is post two in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  2. A book report: color managment | The Last Word says:
    May 7, 2015 at 8:56 am

    […] This is post three in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  3. A book report: stochastic screen pitch | The Last Word says:
    May 7, 2015 at 8:56 am

    […] This is post four in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  4. A book report: some advice from a reader | The Last Word says:
    May 7, 2015 at 8:57 am

    […] This is post five in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  5. A book report: hard copy proofing | The Last Word says:
    May 7, 2015 at 8:58 am

    […] This is post six in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  6. A book report: winnowing and gamut checking | The Last Word says:
    May 7, 2015 at 8:58 am

    […] This is post seven in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  7. A book report: organization | The Last Word says:
    May 7, 2015 at 8:59 am

    […] This is post eight in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  8. A book report: gamut mapping example | The Last Word says:
    May 7, 2015 at 10:00 am

    […] This is post nine in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  9. A book report: proof sheets | The Last Word says:
    May 10, 2015 at 3:44 pm

    […] This is post ten in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  10. A book report: LensWork publishing services | The Last Word says:
    May 14, 2015 at 12:26 pm

    […] This is post eleven in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  11. A book report: page size revisited | The Last Word says:
    May 14, 2015 at 12:55 pm

    […] This is post twelve in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  12. Book report: options, options | The Last Word says:
    June 23, 2015 at 2:17 pm

    […] This is post twelve in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  13. Book report: full bleed images | The Last Word says:
    June 24, 2015 at 10:43 am

    […] This is post thirteen in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  14. A book report: more on gamut mapping | The Last Word says:
    July 2, 2015 at 3:52 pm

    […] This is post fourteen in a series about my experiences in publishing a book. The series starts here. […]

    Reply
  15. A book report — coloring outside the lines | The Last Word says:
    February 7, 2016 at 2:16 pm

    […] This is a continuation of a series of posts that I started what seems like a long time ago about getting a book designed and published. The series starts here. […]

    Reply
  16. A book report — proofreading | The Last Word says:
    February 8, 2016 at 9:21 am

    […] This is a continuation of a series of posts that I started what seems like a long time ago about getting a book designed and published. The series starts here. […]

    Reply
  17. A book report – getting the pages flat | The Last Word says:
    February 9, 2016 at 1:37 pm

    […] This is a continuation of a series of posts that I started what seems like a long time ago about getting a book designed and published. The series starts here. […]

    Reply
  18. A book report — embossing the cover | The Last Word says:
    February 19, 2016 at 9:23 am

    […] This is a continuation of a series of posts that I started what seems like a long time ago about getting a book designed and published. The series starts here. […]

    Reply
  19. A book report – page flatness revisited | The Last Word says:
    March 28, 2016 at 1:41 pm

    […] This is a continuation of a series of posts that I started what seems like a long time ago about getting a book designed and published. The series starts here. […]

    Reply
  20. A book report — page flatness and glue | The Last Word says:
    April 18, 2016 at 9:09 am

    […] This is a continuation of a series of posts that I started what seems like a long time ago about getting a book designed and published. The series starts here. […]

    Reply
  21. A book report — varnish options | The Last Word says:
    April 20, 2016 at 4:48 pm

    […] This is a continuation of a series of posts that I started what seems like a long time ago about getting a book designed and published. The series starts here. […]

    Reply
  22. A book report — signing off on the dummy | The Last Word says:
    May 10, 2016 at 8:17 am

    […] This is a continuation of a series of posts that I started what seems like a long time ago about getting a book designed and published. The series starts here. […]

    Reply
  23. A book report — hard proofing | The Last Word says:
    May 12, 2016 at 10:30 am

    […] This is part of a series about my experiences in publishing a book. The series starts here. […]

    Reply
  24. A book report — press proofs | The Last Word says:
    July 7, 2016 at 3:06 pm

    […] This is part of a series about my experiences in publishing a book.The series starts here. […]

    Reply
  25. A book report — Matchprints & mechanicals | The Last Word says:
    July 17, 2016 at 3:11 pm

    […] This is part of a series about my experiences in publishing a book.The series starts here. […]

    Reply
  26. A book report — spot color proofing | The Last Word says:
    July 21, 2016 at 3:52 pm

    […] This is part of a series about my experiences in publishing a book.The series starts here. […]

    Reply
  27. A book report — printing scheduled | The Last Word says:
    August 13, 2016 at 1:06 pm

    […] This is part of a series about my experiences in publishing a book.The series starts here. […]

    Reply
  28. A book report — on the press | The Last Word says:
    August 26, 2016 at 8:11 am

    […] This is part of a series about my experiences in publishing a book.The series starts here. […]

    Reply
  29. A book report — the strike test | The Last Word says:
    September 10, 2016 at 1:50 pm

    […] This is part of a series about my experiences in publishing a book. The series starts here. […]

    Reply
  30. A book report — early “sales” opportunity | The Last Word says:
    September 16, 2016 at 10:04 am

    […] This is part of a series about my experiences in publishing a book.The series starts here. […]

    Reply
  31. A book report — the books arive says:
    October 19, 2016 at 1:35 pm

    […] This is part of a series about my experiences in publishing a book. The series starts here. […]

    Reply
  32. A book report — a hard look at the book says:
    October 20, 2016 at 2:10 pm

    […] This is part of a series about my experiences in publishing a book. The series starts here. […]

    Reply
  33. A book report — a look at the content says:
    October 21, 2016 at 1:59 pm

    […] This is part of a series about my experiences in publishing a book. The series starts here. […]

    Reply
  34. A book report — printing the portfolio images says:
    October 25, 2016 at 12:00 pm

    […] This is part of a series about my experiences in publishing a book. The series starts here. […]

    Reply
  35. A book report — portfolio image quality says:
    October 29, 2016 at 2:00 pm

    […] This is part of a series about my experiences in publishing a book. The series starts here. […]

    Reply
  36. A book report — portfolio image quality says:
    January 11, 2017 at 2:32 pm

    […] This is part of a series about my experiences in publishing a book. The series starts here. […]

    Reply
  37. A book report — taking stock after 3 months says:
    January 28, 2017 at 12:52 pm

    […] This is part of a series about my experiences in publishing a book. The series starts here. […]

    Reply
  38. A book report — disassembly says:
    February 10, 2017 at 11:53 am

    […] This is part of a series about my experiences in publishing a book. The series starts here. […]

    Reply
  39. A book report — mull survey says:
    February 11, 2017 at 3:56 pm

    […] This is part of a series about my experiences in publishing a book. The series starts here. […]

    Reply
  40. A book report — disassembling a Blurb book says:
    February 12, 2017 at 1:12 pm

    […] This is part of a series about my experiences in publishing a book. The series starts here. […]

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

May 2025
S M T W T F S
 123
45678910
11121314151617
18192021222324
25262728293031
« Apr    

Articles

  • About
    • Patents and papers about color
    • Who am I?
  • How to…
    • Backing up photographic images
    • How to change email providers
    • How to shoot slanted edge images for me
  • Lens screening testing
    • Equipment and Software
    • Examples
      • Bad and OK 200-600 at 600
      • Excellent 180-400 zoom
      • Fair 14-30mm zoom
      • Good 100-200 mm MF zoom
      • Good 100-400 zoom
      • Good 100mm lens on P1 P45+
      • Good 120mm MF lens
      • Good 18mm FF lens
      • Good 24-105 mm FF lens
      • Good 24-70 FF zoom
      • Good 35 mm FF lens
      • Good 35-70 MF lens
      • Good 60 mm lens on IQ3-100
      • Good 63 mm MF lens
      • Good 65 mm FF lens
      • Good 85 mm FF lens
      • Good and bad 25mm FF lenses
      • Good zoom at 24 mm
      • Marginal 18mm lens
      • Marginal 35mm FF lens
      • Mildly problematic 55 mm FF lens
      • OK 16-35mm zoom
      • OK 60mm lens on P1 P45+
      • OK Sony 600mm f/4
      • Pretty good 16-35 FF zoom
      • Pretty good 90mm FF lens
      • Problematic 400 mm FF lens
      • Tilted 20 mm f/1.8 FF lens
      • Tilted 30 mm MF lens
      • Tilted 50 mm FF lens
      • Two 15mm FF lenses
    • Found a problem – now what?
    • Goals for this test
    • Minimum target distances
      • MFT
      • APS-C
      • Full frame
      • Small medium format
    • Printable Siemens Star targets
    • Target size on sensor
      • MFT
      • APS-C
      • Full frame
      • Small medium format
    • Test instructions — postproduction
    • Test instructions — reading the images
    • Test instructions – capture
    • Theory of the test
    • What’s wrong with conventional lens screening?
  • Previsualization heresy
  • Privacy Policy
  • Recommended photographic web sites
  • Using in-camera histograms for ETTR
    • Acknowledgments
    • Why ETTR?
    • Normal in-camera histograms
    • Image processing for in-camera histograms
    • Making the in-camera histogram closely represent the raw histogram
    • Shortcuts to UniWB
    • Preparing for monitor-based UniWB
    • A one-step UniWB procedure
    • The math behind the one-step method
    • Iteration using Newton’s Method

Category List

Recent Comments

  • bob lozano on The 16-Bit Fallacy: Why More Isn’t Always Better in Medium Format Cameras
  • JimK on Goldilocks and the three flashes
  • DC Wedding Photographer on Goldilocks and the three flashes
  • Wedding Photographer in DC on The 16-Bit Fallacy: Why More Isn’t Always Better in Medium Format Cameras
  • JimK on Fujifilm GFX 100S II precision
  • Renjie Zhu on Fujifilm GFX 100S II precision
  • JimK on Fuji 20-35/4 landscape field curvature at 23mm vs 23/4 GF
  • Ivo de Man on Fuji 20-35/4 landscape field curvature at 23mm vs 23/4 GF
  • JimK on Fuji 20-35/4 landscape field curvature at 23mm vs 23/4 GF
  • JimK on Fuji 20-35/4 landscape field curvature at 23mm vs 23/4 GF

Archives

Copyright © 2025 · Daily Dish Pro On Genesis Framework · WordPress · Log in

Unless otherwise noted, all images copyright Jim Kasson.